Loading... Please wait...

Categories

Add to Wish List

Click the button below to add the Elinchrom D-Lite 200W/s RX 2 Flash Head (Model 20486.1) to your wish list.

Elinchrom D-Lite 200W/s RX 2 Flash Head (Model 20486.1)

  • Image 1
  • Image 2
  • Image 3
Price:
R5,695.00
Shipping:
Free Shipping
Quantity:



Product Description

PRODUCT HIGHLIGHTS

  • Built-in Skyport Wireless Receiver
  • Multi-voltage Monolight: 90-260VAC
  • Recycling: 0.2-0.8 Sec. (115V)
  • Flash Duration: 1/1,200 Sec (Full Power)
  • 5 Stop Power Variability in 1/10 Stops
  • Pre-Flash Detector
  • Fan-Cooled, Auto Dump
  • Optional iPhone, iPad, iPod Touch Apps
  • Accepts 7-8 mm Umbrella Shafts
  • Firmware Update Options

 

The Elinchrom D-Lite 200W/s RX 2 Flash Head raises the bar on the capabilities of a lightweight, portable strobe. The auto-sensing, multi-voltage flash D-Lite RX 2 recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a lightning-fast 0.2-0.8 sec. (115V) with flash durations as short as an action-stopping 1/1,200 sec at full power. But that's just the beginning.

 

The D-Lite 200W/s RX 2 is packed with professional and convenience features usually found in flash heads twice its price. Although this head accepts one, you won't need a PC cord. It has a built-in EL Skyport Receiver with 8 frequency channels that can handle 4 distinct groups of flashes. Separate purchase of the EL Skyport ELS Speed Transmitter not only allows you to trigger your flash at distances up to 393' but gives you control of power on/off, modeling light functions and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional WiFi module to the transmitter and you can use specially designed apps that allow full remote control via your for iPhone, iPad or iPod Touch.

D-Lite 200W/s RX 2's bayonet mount accepts all Elinchrom accessories and softboxes up to 53" (135 cm). It comes with a power cord with a U.S. plug, sync cord, flash tube and protective cap. The included 120V 100W modeling lamp must be swapped out when using the unit in nominal 230V electrical environments.

Basic Features
  • Built-in EL Skyport receiver for triggering
  • 8 Frequency channels with 4 groups
  • Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
  • Pre-Flash detector system to enable the use of D-Lite RX with speedlights
  • Power Auto-dump
  • 5V sync socket for maximum protection of digital cameras
  • Automatic temperature controlled ventilation
  • Multi-voltage auto-detection: 90-260VAC (excluding modeling lamp)
  • Lightweight but strong housing. Robust, functional and elegant
  • Accessory bayonet accepts all accessories and Rotalux softboxes up to 53" (135 cm)
  • Rubberized large handle with spare fuse storage
  • Stand bracket with extra umbrella fitting for larger umbrella shafts
Enhancements
  • Radio remote control of flash power settings, modeling lamp on/off, speed sync mode and triggering
  • Take full control of your unit's settings with the optional EL Skyport App for iPhone, iPad and iPod Touch via the optional WiFi module
  • Additional features such as Flash-Delay for strobing effects can be accessed via the free EL Skyport Software
  • Visual Flash Confirmation option. The modeling lamp comes on to confirm the flash has been triggered and goes off when recycling
  • Proportional adjustment of the modeling lamp
  • Variable f/stop steps: 1/1, 5/10, 4/10, 3/10, 2/10 or 1/10 steps are available
  • Programmable ready beep function
  • Firmware update option

SPECIFICATIONS :

 

Maximum Watt/Seconds

200

Flash Variability

5.0 Stops in 1/10th stop increments (12 - 200W/s)

Recycle Time

@ 230V: 0.2 - 0.6 sec
@ 115V: 0.2 - 0.8 sec

Flash Duration

1/1,200 Sec.

Voltage Stabilization

0.5%

Auto Dump

Yes

Power Requirements

Multi voltage, 90-260VAC

Modeling Light Wattage

100W
Control: Proportional, Low, Full, On/Off

User Replaceable Flashtube

Yes

Umbrella Mount

Centered tub, for EL-umbrellas 7.0 mm diameter
Extra fitting on bracket for larger sized shafts

Sync Voltage

5.0V Compatibility with digital cameras

Power Consumption

115VAC, 60Hz: No flash / recycling 160W / 850VA
230VAC, 50Hz: No flash / recycling 140W / 1,200VA

Triggering

Synch cord (3.5 mm), optical slave
Integrated Receiver, 4 groups, 8 frequencies
Receiver range: 164' (50 m) indoors, 393' (120 m) outdoors

Changeable Reflector

Yes

Flash Ready Indicator

Audible, visual

Fan Cooled

Yes

Dimensions

10.2 x 7.5 x 5.5" (26 x 19 x 14 cm)

Weight

2.9 lb (1.3 kg)

 


Find Similar Products by Category




Receive our Newsletter